There is a wide variety of knobs and handles for furniture
What type of shooter were you thinking of installing? Where do you want to install a knob? What style are you looking for?
Most of the kitchen handles are in the current line.
In the current line, we will also find handles for bathrooms. Handles for cabinets and dressing rooms.
If what we want is to change the furniture handles, we can look at the home handles.
But, both in the kitchen and in the dining room furniture. More classic handles are chosen.
If you prefer that no handle protrude from the doors. We will have a collection of embedded handles. They will serve both for swing doors and sliding doors.
If, but, we want the same door to be the handle. But you do not want it to be embedded in the door, the section would be rim-type or semi-hidden kitchen cupboard handles.
A collection that is very beautiful and elegant is the leather handles. Place some leather handles on the furniture in the bedroom or dressing. Room and differentiate yourself from the others.
Details that give a new look to your home
The kitchen is one of the rooms most visited by all the members of your house. This is why making small changes in the kitchen makes us enjoy new rooms at very affordable prices.
Decoranddecor offers knobs and handles for the kitchen. At very affordable prices for all pockets.
Change the kitchen handles whenever you want. Getting Knobs and kitchen cupboard handle doors at very affordable prices.
I want to change the handles that I already have installed on the doors for new handles,
What should I take into account?
The most important thing to keep in mind is to determine the size of the holes to take advantage of them if possible.
If it is a single hole, it is simple and we can choose any model since it will match.
Keep in mind possible marks on the furniture that have been generating over time.
If we have more than one hole, we have to measure from center to center of the hole. This measurement is what determines which kitchen cupboard. Handles will serve us without drilling new holes and make installation simple.
If it does not coordinate, check it well and, if you see that it is well taken. you will have to search more than usual and it will cost you more to find a substitute or think. About the possibility of installing one that covers the holes of the unused handle. Or cover them with some specific product.
A handle gives a new look to the doors and is a great solution to give a new touch to the furniture at a very low cost.
What do I need for the installation of a handle or knob?
with a simple star screwdriver, we have enough. Since the initial idea should be to replace the model. with another that coordinates in drill measurements.
If not, we will need a drill with a wood bit to make the new hole.
Remember that we will also need the appropriate screws for the thickness of the door. Which must go through and thread a little into the kitchen cupboard handles.
If it were a visible wood screw, it will be the opposite. we must measure the door so that it does not go through and mark it on the back.
How is a handle installed?
It is very simple; you have to screw it with a screw that is almost always metric 4 through the door or drawer from the back. They can be other measures and it never hurts to check it, but there are very few models that use another measure.
To know what length of the screw we have to use, we must calculate the thickness of the door or drawer. Plus what we thread on the handle so that it is attached.
Keep in mind that in the drawers, we can find double thickness on some occasions, so you have to check it before.
There are also some screws called shears. which have notches on the screw to be able to cut it where it best goes to our installation.
Outside the wood screw seen, it will be the opposite. We must measure the door so that it does not go through and mark it on the back. The best way to do any kind of remodeling in the house remains to contact professionals in the field. So whether it is your handle or something more that needs to be upgraded in your kitchen, give a call to a professional kitchen contractor that will handle all the work.
How can I install a recessed kitchen cupboard handle door and what tools do I need?
The most appropriate way is with a milling machine and in some cases, a drill could be useful.
In the event that it is circular, We will find milling cutters for use with a drill. So we will not need a tool as specific as a milling machine. We will find different diameters, so we will have to look at the diameter of the insert. we will have to see if the recessed handle has enough flanges to cover the possible marks that may occur on the edge.
In the event that the tab is very small and we are afraid that it may be seen. Especially in cases of post-formed or melanin doors. Use well-sharpened burs to avoid this situation.
Once the housing of the handle has been made, it is time to fix it. Some handles are equipped. With a small hole to be able to screw them through the inner sides and on other occasions. They go through holes like any handle, although it is less common. Another option is to fix it with some kind of contact glue.
