The firmware is a software that defines how your Netgear wireless router functions. Every Netgear router should go through a firmware update from time to time in order to ensure its proper functioning. If you are unable to update the firmware of your home router via www.routerlogin.net, the following reasons might be behind the issue:
- You have followed incorrect instructions to update the firmware of your Netgear Nighthawk router.
- Your WiFi-enabled device is infected with a virus.
- You are interrupting the process of firmware update.
- Your Internet Service Provider (ISP) has caused an internet issue.
- The connection between your Netgear router and the existing modem is unstable.
- The firmware that you have downloaded is not compatible with your router model.
- Technical glitches can also prevent you from updating your wireless device.
Keep reading and find out how to resolve the Netgear router firmware update failure issue.
Fixed: Netgear Router Firmware Update Failed
-
Reboot Your Netgear Router
Most people consider trying this before they opt for any other troubleshooting hack. Perhaps, you should give your Netgear Nighthawk router a restart too. It might help you fix the issue you are currently experiencing.
Here is how you can reboot your Netgear WiFi router:
- Disconnect your Netgear router from the existing modem.
- Power off the router and unplug it from the electrical outlet.
- Wait for some time.
- Thereafter, plug your Netgear router back into the socket and power it on.
Now, try to update the firmware of your WiFi device by using the 192.168.1.1 default IP. No luck? Well, in that case, keep reading.
-
Contact Your Internet Service Provider
For you to successfully perform Netgear router firmware update, you should have access to a blazing-fast internet connection. However, if you find that a weak internet connection is the reason behind why you are unable to update your device, contact your ISP.
If he agrees that the internet issue is from his end, ask him to get it resolved as soon as possible.
-
Avoid Pressing Any Tab
Of course, sitting patiently while the firmware of your router is in the process of getting updated is difficult. But, that doesn’t mean you’ll press tabs or perform other background activities on your device. Doing so might interrupt the process of Netgear router firmware update.
Therefore, avoid pressing tabs or opening new windows on your device. Otherwise, who knows for how long you won’t be able to update the firmware of your router.
-
Verify the Ethernet Connection
Have you used an Ethernet cable to connect your Netgear wireless router and the existing modem? Well, it looks like it isn’t free of damages. Or else, your router’s firmware update wouldn’t have failed.
To get rid of the issue, it is recommended that you either tape up the Ethernet cable you are using at present or buy a new one to connect your devices.
Once you are done following these troubleshooting tips, try to update the firmware of your Netgear Nighthawk router by following the instructions mentioned below.
How to Perform Netgear Router Firmware Update?
- Build a connection between your Netgear router and the existing modem. You can use any medium to connect your devices.
- Switch on your PC and launch an internet browser.
- In the URL bar of the browser, type the default web address of your router.
- Press the Enter key.
- You will find yourself on the Nighthawk router login page.
- When prompted, fill in the default username and password.
- Click Log In.
- Once logged in, head over to the Settings menu.
- Go to Maintenance > Firmware Update.
Now, follow the on-screen prompts to complete updating the firmware of your router to the latest version.
Summing Up
Many users, especially the ones who are using Netgear router for the first time get stuck during the firmware update process. If you are also standing in the queue, then trust us, following the aforementioned troubleshooting tips will do you good.
If you liked reading this article, do drop a word of appreciation in the comment section.
