Are you facing issues with Linksys Velop AC2200? Experiencing a very bad day because your Linksys AC2200 Velop is not working effortlessly? Argh! Need not to worry! We understand your situation how frustrating it can be to experience such issue. If your Linksys Velop AC2200 is not performing smoothly, then reading the fixes given in this post can be of big help! Outlined below are a few simple yet effective hacks that can improve the performance of your Linksys Velop AC2200. Let’s dig a little deeper!
Tip 1: Change the Placement
Yes, you read it right! The placement of your Linksys Velop AC200 is the most important tip that you can’t ignore. To improve the performance of your Velop device, you must place it at its ideal location. In the event that you have placed your Linksys Velop AC2200 in a corner, inside a cabinet or back of anything, then it’s time to place it in an open and ventilated area. Apart from this, the center-most location of your home would be the best place for your AC2200 Velop. Also, make sure that the device is placed out of the reach of windows and public WiFi networks. Doing so will somehow prevent WiFi signals interference.
Once you’re done with placing your device, login to Linksys Velop to see whether this tip worked for you or not.
Tip 2: Update the Velop’s Firmware
Your Linksys Velop AC2200 need firmware updates from time to time in order to fix various technical glitches and perform effortlessly. Updating the Velop’s firmware can improve the performance of your device up to 30%, add new features, enhance security, and much more. So, consider updating your Velop’s firmware by navigating to the Linksys official site.
Updating Linksys Velop AC2200 firmware have helped many users across the globe for improving the performance of their device. To confirm the same, see Linksys Velop review.
Tip 3: Power Cycle Your Linksys Velop
Just like your other WiFi devices, your Linksys Velop AC2200 needs to be rebooted or power cycled occasionally. For newbies, power cycle means to give your Linksys Velop AC2200 a fresh start. You can reboot or power cycle your Linksys Velop AC2200 by following the steps outlined underneath:
First of all, disconnect the currently connected like PC, laptop, gaming console, HDTV, baby monitors, smartphones, etc. from your Linksys Velop AC2200.
Then, unplug your Linksys Velop AC2200 from the wall outlet.
Count to 50.
Thereafter, plug your Linksys Velop AC2200 back in.
Wait for some time. The power LED on your Linksys Velop AC2200 might take a couple of minutes to become stable.
Once you’re done, connect your WiFi devices to the Velop AC2200.
Tip 4: Change the Velop WiFi Channel
Once you are done with Linksys Velop setup, you choose the 2.4 GHz channel, right? Well, that’s normal. Around 99% users across the globe do the same. But, keep this in mind – when so many WiFi devices (extender and router of any brand) operating nearby you might be using the same channel, resulting in the poor performance of your Linksys Velop AC2200. Therefore, it is important that you change the channel of your Linksys Velop AC2200 to the one that is less-congested. Login to Linksys Velop via its default IP and select the best WiFi channel for the device.
Don’t know how to setup Linksys Velop? Want to know the steps to change the WiFi channel of Linksys Velop AC2200? If you nod in yes, drop your questions into the comments section.
The Final Words
We hope that the tips listed in this post will help you make your Linksys Velop AC2200 perform effortlessly. Please share your valuable feedback with us. And, apart from this, you have any other suggestion that can help others, please without any hesitation, lay them on us.
Wishing you a lag-free and smooth experience with Linksys Velop AC2200!
